NYT Nylon Pleated Filter Cartridge
Naturally hydrophilic nylon media wets readily and can be matched with rating and seal choices around the fluid.
NYTThe gallery shows different views and construction details from this series.
Product overview
A naturally hydrophilic nylon membrane pleated cartridge reviewed by rating, length, end fitting and seal.
Naturally hydrophilic nylon media wets readily and can be matched with rating and seal choices around the fluid.
- Series
- NYT
- Selection priorities
- Media, rating basis, length, end fitting, seal, differential pressure and replacement conditions
Working principle
NYT uses naturally hydrophilic nylon membrane for liquid filtration, with retention depending on the selected membrane grade.
Construction & flow path
Pleated nylon membrane, ends, support and seals form the cartridge. Hydrophilicity and chemical compatibility are separate checks.
Applications & filtration duty
For liquid particle filtration needing readily wetted media. Validate suitability where useful fluid constituents may interact with or adsorb onto the membrane.
Technical parameters
Use these specifications for selection. Materials, dimensions and operating conditions follow the selected model and agreed specification.
Materials & construction
- Filter media
Naturally hydrophilic reinforced nylon 6 / 66 microporous membrane; PP inner and outer supports.
- Construction & fabrication
Pleated nylon-membrane construction.
- Seal-material codes
S=silicone; V=fluoroelastomer; VT=PTFE-encapsulated; R=EPDM; Z=NBR
Filtration specifications
- Filtration ratings
0.1 / 0.22 / 0.45 / 0.65 / 1.00 μm
- Nominal length
10 / 20 / 30 / 40 in
- Flow and pressure-loss selection
Assess flow and pressure loss for the specific rating, media and temperature; use curves only for the specifications they represent.
Operation & maintenance
- Operating temperature
≤80 °C
- Maximum forward element differential pressure
0.42 MPa at 25 °C
- Maximum reverse element differential pressure
0.21 MPa at 25 °C
- Sterilization reference
Sterilization reference: 121 ± 2 °C, 30 min per cycle with in-line steam or an autoclave; review cycle count, material compatibility and process validation for the selected model.
Connections & installation
- End-fitting codes
A=222 single-open-end with solid end cap; B=222 single-open-end with spear end; C=226 single-open-end with spear end; D=double-open-end with PP gasket
Selection information
- Outside / inside diameters
Model and configuration notes
Series or media + target rating + length + end fitting + sealLength, end and seal codes are interpreted within the relevant series; the same letter may mean different things in another family.
View the product sheetReview specifications, ordering options and construction diagrams for your application.
Information to prepare for an inquiry
Use this family’s selection priorities to share available operating conditions, equipment information or drawings.
- Provide solvents, acid/alkali concentrations and operating temperature.
- Identify proteins, additives or other useful constituents to retain.
- Check membrane rating, ends, seals and required tests.
Operation & maintenance
Wet and vent after installation under the agreed procedure and inspect end seals. Chemical cleaning and reuse require model-specific evidence.
Common operating inputs
- Fluid and major composition
- Target flow and operating pattern
- Operating temperature and pressure
- Contaminant form and target rating
- Material, connection and space constraints
- Maintenance frequency and existing equipment
Discuss this product’s configuration
Share the fluid, operating and installation conditions to review suitable specifications.
Products can be configured around the actual duty. Final specifications follow the quotation, drawing or technical agreement confirmed by both parties.
Related products
PP Membrane Pleated Filter Cartridge
The pleated construction provides a larger effective filtration area for liquid duties that balance throughput and particle capture.
Learn morePEST PES Membrane Pleated Filter Cartridge
A thermally bonded construction minimizes added adhesive, while the pleated format balances filtration area and dirt-holding space.
Learn morePTFET PTFE Membrane Filter Cartridge
Hydrophilic and hydrophobic media directions make it easier to match the cartridge to the fluid’s wetting behavior.
Learn more