High-flow cartridge housings
A housing for high-flow cartridges, reviewed by cartridge interface, count, length and installation.
DLCVAI-enhanced reference views of similar equipment. Actual configuration follows the agreed specification.
Product overview
A housing for high-flow cartridges, reviewed by cartridge interface, count, length and installation.
- Series
- DLCV
- Selection priorities
- Duty, filtration elements, dimensions, materials, interfaces and service conditions
Working principle
Liquid passes through high-flow cartridges that capture particles, while the housing organizes flow and provides seating and sealing.
Construction & flow path
The housing accepts high-flow cartridges. Count, length, ends and seals determine fit, with horizontal or vertical arrangement reviewed for the site.
Applications & filtration duty
For higher-throughput particle or guard filtration. Guard filtration describes downstream protection and does not replace element-rating evidence.
Technical parameters
Use these specifications for selection. Materials, dimensions and operating conditions follow the selected model and agreed specification.
Selection information
- Fluid & viscosity
- Operating flow (m³/h)
- Operating / design pressure (MPa)
- Operating / design temperature (°C)
- Connection size & standard (DN / in)
- Differential pressure & service trigger (MPa)
- Dimensions & service clearance (mm)
Model and configuration notes
Configuration for your applicationShare the fluid, filtration goal, operating conditions and installation requirements. Existing models, nameplates or drawings help us review the configuration.
Nozzle layout reference 1–15
Compare inlet and outlet directions to plan the connection to your pipework.
Opposite sides · level
Side in · bottom out
Side in · right elbow
Twin bottom ports
Bottom in · upper right
Opposite sides · high to low
Bottom in · upper left
Same side · high to low
Top in · bottom out
Top in · left elbow
Top in · lower right
Side in · return pipe
With return pipeOutlet defined by designRight in · bottom out
With return pipeSide in · lower left
With return pipeSide in · left elbow
With return pipe
Information to prepare for an inquiry
Use this family’s selection priorities to share available operating conditions, equipment information or drawings.
- Provide element model, flow direction, ends and length.
- Confirm housing design pressure and element differential pressure separately.
- Size element count around viscosity, flow and service interval.
Operation & maintenance
Before opening, replacing elements or disassembly, stop and isolate under the equipment procedure, depressurize, drain and confirm zero pressure. Record housing pressure drop and inspect each element's end seal and retention. Plan clearance for full-element removal and handling.
Common operating inputs
- Fluid and major composition
- Target flow and operating pattern
- Operating temperature and pressure
- Contaminant form and target rating
- Material, connection and space constraints
- Maintenance frequency and existing equipment
Discuss this product’s configuration
Share the fluid, operating and installation conditions to review suitable specifications.
Products can be configured around the actual duty. Final specifications follow the quotation, drawing or technical agreement confirmed by both parties.
Related products
PCV Plastic Cartridge Filter Housing
A compact PP single-cartridge housing for lower-flow liquid duties, configured around length, connections and seals.
Learn moreSCV Single-cartridge Filter Housing
A compact single-cartridge housing that can be configured clearly around cartridge length, connections and installation space.
Learn more
MCV Multi-cartridge Filter Housing
Multiple cartridges in parallel make it easier to scale filtration area and throughput around cartridge count, length and connections.
Learn more