PE Polyester Melt-blown Filter Cartridge
Polyester media offers a useful direction for duties involving elevated temperature or viscosity, including resins and coatings.
PEThe gallery shows different views and construction details from this series.
Product overview
A polyester melt-blown cartridge that can be discussed for higher-temperature or higher-viscosity duties; suitability requires review.
Polyester media offers a useful direction for duties involving elevated temperature or viscosity, including resins and coatings.
- Series
- PE
- Selection priorities
- Media, rating basis, length, end fitting, seal, differential pressure and replacement conditions
Working principle
PE melt-blown cartridges retain particles within the tortuous paths of polyester fibers and are selected as depth filters.
Construction & flow path
Polyester media is combined with the chosen ends and seals. Review warmer or more viscous duties together with the seal and housing conditions.
Applications & filtration duty
A selection direction for particle filtration of resins or coatings, targeting impurities while retaining intended formulation constituents.
Technical parameters
Use these specifications for selection. Materials, dimensions and operating conditions follow the selected model and agreed specification.
Materials & construction
- Filter media
Polyester fiber
- Construction & fabrication
Layered melt-blown construction, denser inside and more open outside, without adhesive.
Filtration specifications
- Filtration ratings
1 / 3 / 5 / 10 / 25 / 50 / 75 / 100 μm
- Nominal length
9.87 / 10 / 20 / 30 / 40 in
- Outside diameter
63 mm
- Inside diameter
28 mm
Operation & maintenance
- Operating temperature
120 °C
- Maximum element differential pressure
4.2 kg/cm² at 20 °C; check applicable conditions for the selected cartridge.
Connections & installation
- End-fitting codes
A=222 single-open-end with solid end cap; B=222 single-open-end with spear end; C=226 single-open-end with spear end; D=double-open-end with PP gasket; N=no gasket
Model and configuration notes
CMPE + rating + length + end fittingThe ordering prefix for PE polyester melt-blown cartridges is CMPE. Distinguish cartridges from polyester filter bags and provide the complete model for orders or replacements.
View the product sheetReview specifications, ordering options and construction diagrams for your application.
Information to prepare for an inquiry
Use this family’s selection priorities to share available operating conditions, equipment information or drawings.
- Provide viscosity at operating temperature rather than only at room temperature.
- Identify gels, hard particles and formulation particles that must remain.
- Review polyester compatibility with process and cleaning fluids.
Operation & maintenance
Viscosity changes can affect pressure drop. Review temperature, flow and pressure-drop records together when judging fouling, and inspect end seals during replacement.
Common operating inputs
- Fluid and major composition
- Target flow and operating pattern
- Operating temperature and pressure
- Contaminant form and target rating
- Material, connection and space constraints
- Maintenance frequency and existing equipment
Discuss this product’s configuration
Share the fluid, operating and installation conditions to review suitable specifications.
Products can be configured around the actual duty. Final specifications follow the quotation, drawing or technical agreement confirmed by both parties.
Related products
CM PP Melt-blown Filter Cartridge
A gradient-density structure captures contaminants progressively from outside to inside while balancing flow and dirt-holding capacity.
Learn moreCMA Absolute-rated PP Melt-blown Cartridge
A gradient-density PP construction with defined rating options for duties that place greater emphasis on particle control.
Learn moreCMD Long-fiber Filter Cartridge
The long-fiber layer creates a deeper capture path for duties that balance flow and contaminant capacity.
Learn more